Model 710 Static Meter
The 710 Static Meter is an advanced instrument
for general factory use. It was developed to
provide industrial engineers with an accurate,
reliable and cost-effective method of analysing
industrial static problems. It is equally useful in
production, technical, quality and service
departments.
|
Specification |
| Reading: | Surface valtage in kV at 100mm |
| Range/Sensitivity: | 100kV @ 100V resolution |
| Zero Stability: | within 100V |
| Drift: | less than 1% FSD in 10 sec |
| Display: | Accuracy 3.5 digit LCD with polarity and "LO BAT" indication. |
| Controls: | Push button switches on power, zeros initial reading
and maintains instrument operation for duration of
observation. Zero adjustment through wall of case. |
| Power Supply: | PP3 replaceable Battery-supplied. Power for 500Hrs
continuous use or 2 Yrs of cccasional use. |
| Earth Bonding: | 10mm earth stud, 2m coiled earth lead with 4mm
bayonet pin clip. |
| Dimensions/Weight: | 142 x 66 x 32mm, 330g net |
|
Model 710 Static Meter Analysis
Ignoring static electricity problems can
have a high cost in reduced production and
substandard product.
A good static meter allows the industrial engineer to
analyse the problem scientifically. The meter shows
where and how the static is generated, its magnitude
and its polarity.
Solution
The static meter monitors the effectiveness
of the action taken to solve the problem. If the
solution involves static elimination equipment, the
meter shows the most effective positioning for this
equipment and can monitor its performance on a
long-term basis.
Standards
A static meter allows the engineer to set
standards to avoid future problems. These can range
from an acceptable safe static level in a hazardous
area, to charge levels in products being processed
or sent to customers.
|
